I put it in and the short darts don’t reach the flywheels
After many attempts at lubing, sanding down imperfections that catch on the blaster cage, and taking out every battery cage screw to keep that area loose I cannot get this pusher to feed reliably. If I use the worker talon adaptor it takes about 17 trigger pulls to fire 15 darts, and the dart zone adaptor never stood a chance, I can't get through 15 darts with that adaptor in any less than 20 trigger pulls. Now I could still try tightening the return spring or maybe a few modifications to the pusher itself (the ladder I'm a little weary of doing) so I don't necessarily think this is a bad product but for something sold as 'drop in' I wouldn't give this more than 3 stars.
Tldr; Frustrating reliability in my experience especially with Dart Zone adaptor, but could shine with some finishing work. Definitely not a drop in replacement, hopefully you're one of the lucky ones who it seems to work fine for. Print quality was not bad at first glance but it seems some small imperfections are impacting the pushers movement. Definitely give it a buy if the spectrum is going to be your main flywheeler that you want to run for short darts.
Really great. So snappy. A little slower than full darts but way more accurate
Very good print quality and excellent customer service. Unfortunately I have to modify the pusher to make it work in my red spectrum. The pusher was not long enough to consistently feed into the printed daybreak cage from OOD. In order to fix this i extended the pusher by gluing plastic onto the end and trimmed it to allow smooth operation. I found there was a lot of adjustments needed to make cage and pusher work for the red spectrum. I assume the parts should work well for the green?
OOD mod pack with 42.5 mm cage.
Ive been trying for two months to try and make this pusher work with no results.
Thr darts simply wont feed into the flywheels they just sit behind the wheels until the vibration from the motors wiggle them into the cage. Ive tried extending the pusher, experimenting with every dart I could think of, and cutting darts at lengths between 36mm to 40mm, none of it works.