Crooked Cousin Mountable Blaster
Crooked Cousin Mountable Blaster
Crooked Cousin Mountable Blaster

Crooked Cousin Mountable Blaster

Regular price $24.50 Sale

PRODUCT DESCRIPTION:  

3D printed Little Rocket Blaster, designed and engineered by Tarik.  This is the Foregrip mountable version of the Little Rocket. Crooked Cousin comes with a Picatinny base. 

INTERNATIONAL ORDERS:
• Please confirm with your customs about importing a 3D printed blaster. 

FEATURES:
• Hot-swap to any ammo type
• Highly customizable to your preferred playstyle
• Small and compact with a strong kick
• Can Fire all major ammo types(Short Dart, Elites, Rivals, Mega, Boomco, Ultra)

Adapters:
Crooked Cousin comes with a Picatinny base. The adapters are a separate 3D printed part that allows the Crooked Cousin to be placed on Nerf-Style or Rival rail.

Notes on Barrels:
• Elite: Has a taper at the bottom to improve hold on Elites.
• Short Dart: Has notches on both sides to allow quicker reload and one-handed loading with SAM and AM.
• Mega: Genuine Megas perform better than fakes ones.
• Rival: Designed to fire one rival ball but can hold two at a time.
• Ultra: One of the best firing ammo types... We don't know why, either.
• Boomco: Designed to grab the notch of the first ring of the dart. Careful not to push the dart too far into the barrel.
• Inline: Holds three short Darts. Tilt barrel down between shots to make sure the dart creates a seal with the tapered front.
• Triple Elite/SD: Designed to fire three triple elites or three short darts. Can hold six shorts darts. Depending on ammo type(i.e., Orange Nipple Darts), will fire three at a time when six darts are present. 

COLORS:
Primary = Body, Bottom Plate
Accent = Trigger, Rod
Barrel = Barrel

SPECS:
• FPS Specs (Strong Spring)
-- Short Dart 113.4 FPS (5.5)
-- Elites 96.9 FPS (2.9)
-- Rival 78 FPS (3.7)
-- Mega 77.6 FPS (1.6)
-- Boomco 90.7 FPS (2.8)
-- Ultra 102.8 FPS (4.8)
-- Triple 53.6 FPS (4.2)

• FPS Specs (Standard Spring)
-- Short Dart 94.6 FPS (1.4)
-- Elites 83.3 FPS (2.3)
-- Rival 54.1 FPS (3.1)
-- Mega 62.7 FPS (1.4)
-- Boomco 59 FPS (4.2)
-- Ultra 76.3 FPS (2.3)
-- Triple 49.7 FPS (4.2)
  
KIT INCLUDES:
• 4x M3 Square Nuts (already Installed), M3x10mm Screws
• 16mm and 23mm O-Rings
• Central Screw
• Trigger Spring
• Main Spring
• M3x12mm Ball pin Rod
• Clear plastic Tubing(Already installed)
• 2x M3 Hex Nut
• 2x M3x30mm hex Screws

KIT INSTRUCTION MANUAL:
Little Rocket Manual v2

KIT OVERVIEW VIDEO:


LAUNCH VIDEO:

WHAT YOU NEED ASIDE FROM THE KIT:
• M3 screwdriver 
• Needle nose Pliers
• Phillips #2
• Lubricant (found here)

BUILD GUIDE VIDEO:


Customer Reviews

Based on 2 reviews
100%
(2)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
B
Bartandroid123
An excellent buy.

Great little backup blaster, mounting it on a rival rail with the adapter was a little finicky but once on, You can comfortably prime it from the blaster. The only problem I had is about the square nuts used to hold the bottom plate in place came pre-inserted in my unit and I didn't push them in like the build guide said, so they fell out during assembly and I had to take them apart to push them in. But when assembled it feels great in the hand, really good print quality. The performance is also stellar I would also strongly recommend the strong spring (pun intended) to 95% of people. The prime is not too bad but in my opinion, the anchor is the best choice. Strongly recommend!

M
MatthewTheDuck
DEFINITELY BUY

This is my new favorite secondary it shoots hard and it feels good in my hand. Only thing is the screws need to bigger (it won’t fit on the nexus pro the rail is to wide) other than that great blaster.