Skip to product information
1 of 3

Flycore Hardware Kit

Flycore Hardware Kit

Regular price $46.00 USD
Regular price Sale price $46.00 USD
Sale Sold out

This kit contains all of the hardware requred to build a Flycore system for your diy blaster.  The Flycore System is a modular set of internals that can be used for various blasters and the 3d files are open source so that you can design a blaster around it, link to Flycore below.  Combinations of motor and flywheel that are not compatible will not be available choices.

*This kit only contains hardware for Flycore, No 3D parts or components specific to the Quick or Meowser (available in separate listings)


• Multiple Flywheel and Motor Combinations
• All hardware for Flycore included

• 1x Flywheel pair (Kepler, Daybreak, Pulsar, Worker Micro)
2x Flywheel motors (Fang Revamp, Kraken, Loki)
• 1x N20 Gear Motor (300-2000 RPM)
1x M3x8mm Cap Head Screw
4x M2x5mm Flywheel Cage Screw
• 6x M2.6x12mm Toy Screw
1x M2.6x10mm Toy Screw
9x M3 Brass Heat Set Inserts
1x Mag Release Spring (needs to be cut down to 20-22mm)

Quik Hardware Kit
Meowser Hardware Kit
Recommended Darts

Flycore Angled Files
Flycore Straight Files


View full details


We print primarily with Proto-Pasta HTPLA and PLA. Check out our full range of colors here.

3D printed parts should not be left inside hot cars or excessively hot environments.

Customer Reviews

Based on 2 reviews
jaden m.
product was as described.

This kit had everything that was promised. The only issue I had with it was the pusher gearbox stripped out, but that was my bad. (you're not supposed to rotate it manually) I must also recommend that you print the flycore parts scaled up a bit. I printed them at their original size (100 percent scale) with PLA, and everything was very tight. So probably just scale the parts up a little bit,
An excellent kit, all things considered.


Flycore Hardware Kit