1 4

RS187 Luchadora Fully-Assembled Blaster

RS187 Luchadora Fully-Assembled Blaster

$300.00 USD
$300.00 USD
Sale Sold out

*Note, we've had to halt sales on fully-assembled Luchadora blasters due to our current demand and workload in the warehouse. DIY kits are still available!

PRODUCT DESCRIPTION:
If you thought the Cagefighter was amazing, you'll love Luchadora. This blaster was customized by Radiosilence187 just for our shop. It features heat-set inserts, machine screws all around and styling updates to match.

The Luchadora is a stylish single or dual-stage ultra-compact flywheel powerhouse! This is a completed, Ready-to-fire (RTF) blaster. Each blaster is customized for each customer.  

Note: Some photos show the blaster with the stock attachment which is sold separately. 

*Stock attachment point will be printed in the same color as the core of the blaster.

Battery, charger and LiPo alarm are optional add-ons.  LiPo Battery add-on can only be shipped by ground to the continental USA. All packages containing LiPo Batteries have longer delivery times. For more information visit our FAQ page.

FPS ratings are for hard cap games, blasters will generally hit lower than the listing so that they are allowed in games with hard caps at the listing values.

Want to build your own? DIY kits available here. 

Assembly guide PDF on dropbox here.

FEATURES:
• Fully-assembled in house by the OOD team
• Just add a LiPo, alarm and charger and you're good to go!


INCLUDES: COMPLETELY ASSEMBLED BLASTER, INCLUDING THE FOLLOWING:
• 2x - Cherry DB2C lever switches
• 1x - 10A Slim Rocker Switch
• 1x - N20 Gear Motor (600RPM)
• 2x - Kraken 130 Motor
• 1x - N20 PCB w/90 ° JST connector
• 1x - XT60-M (Male Side Only)
• 1x - Black 18AWG Wire Pre-Cut
• 1x - Red 18AWG Wire Pre-Cut
• 2x - JST Connector 
• 2x - 3D Motor Spacers
• 1x - Heat shrink Small (pre-cut) 
• 2x - Heat Shrink Wrap Large (pre-cut)

Hardware (Assembled): 
• 13x - M3x12mm Screws
• 10x - M3x8mm Screws
• 9x - M3x20mm Screws
• 6x - M3x16mm Screws
• 4x - M2x5mm Flywheel Cage Screws
• 4x - M2x12mm Phillips Screws
• 4x - M2 Hex Nut
• 2x - Ball Bearing Detent
• 2x - M3 Square Nut
• 2x - M3x10mm Screw
• 1x - M3 Hex Nut
• 1x - M3x12mm Tapered Thumbscrew

ADDITIONAL LINKS:
• Turnigy 1500mAh 35-70C Battery
• LiPo Starter Kit
• Tachi 29 Round Mag (Low Rate of Fire)
• Luchadora Grip Scales

 

View full details

Customer Reviews

Based on 3 reviews
100%
(3)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
S
Shane G.
My new favorite blaster!

Very well made with superb print quality, feels really solid in your hands. I'm usually not a fan of the no mag release style, but they nailed it. Mags are nice and snug, while being fairly easy to pull out. I really like the trigger design being able to use the separate rev trigger or just the main one. Takes some getting used to, but after about 20 minutes of playing I was able to shoot single shots (most of the time). I chose the 150 fps and performance is as stated if not a bit conservative from my testing. I'm really happy with the blaster overall and looking forward to the dual stage and brushless configs.

R
Robert
Luchadora Blaster Review from OOD’s

I love this little blaster and have now played with it in a couple of wars now. The prints are top notch which is what we’ve come to expect from Out Of Darts. It was well built and shipped in my mind rather quickly. After playing with it, I’ll probably be ordering the parts to allow for a stock attachment. I ordered the one built with the highest rate of fire and note it’s almost impossible to fire single shots and is what I expected. I usually run a heavy load out so it works for me. If that will be a problem for you, you may want to consider one OOD’s options that have a slower ROF. Mine is a blast to play with and look forward to taking it out to the SENC event this weekend!

R
Robert
Luchadora Blaster Review from OOD’s

I love this little blaster and have now played with it in a couple of days now. The prints are top notch which is what we’ve come to expect from them. It was well built and shipped in my mind rather quickly. After playing with it I’ll probably be ordering the parts to allow for a stock attachment. I ordered the one built with the highest rate of fire and note it’s almost impossible to fire single shots and is what I expected. I usually run a heavy load out so it works for me. If that will be a problem for you, you may want to consider one OOD’s options that have a slower ROF. Mine is a blast to play with and look forward to taking it out to the SENC event this weekend!