Rival Jupiter Blaster Kit (Build-it-Yourself) 2s or 3s LiPo required
NOTES FROM LUKE: 3D printed Jupiter Blaster, designed and engineered by Out of Darts and Tarik. The Rival Jupiter Blaster Kit has been several years in the making, and is a build-it-yourself design. This kit does NOT include a magazine, battery or charger. This is a DIY kit. Also available as a pre-modded option linked below (limited quality available).
INTERNATIONAL ORDERS: Please confirm with your customs about importing a 3D printed Rival blaster. German customers have had bad luck shipping there and I do not recommend ordering this product.
FEATURES: -Ball detent spring retention for magazines (no magazine release)! -Full auto with multiple fire rate motor choices -Custom roller pusher -One in the chamber: when a non-empty magazine is removed, a ball is trapped in the custom roller for last shot.
SPECS: -100 FPS w/ hop up -Compatible with all Rival and 12 round magazines -Fang ReVAMPed motors running on 2s or Kraken motors on 3s. -Works with most 2s and 3s batteries up to 1000mAh (some 3s are too tight) -Battery compartment size: 85x42x22mm at shortest points
-Multiple gear motor options. Please note, 3s rate of fire will be 50% higher than the 2s rated listing.
KIT INCLUDES: -10x 3d printed parts in PLA -2x Fang ReVAMPed motors with mounting screws -N20 Micro gearmotor (pusher) -Genuine Omron 21A (REV) -Foamblast 21A clone switch (TRIGGER)) -XT-60 connector pair -Toy screws -Machine screw for battery compartment -Heat shrink
WHAT YOU NEED ASIDE FROM THE KIT: -2s 950mAh or 1000mAh pack 50C or higher (use lower rated packs at your own risk). -Soldering iron and Solder -Basic tools (Wire strippers, helping hands, #0/1 hobby screwdrivers) -Safety glasses (for soldering)