BATCH #2 Now available! Pricing has changed from launch due to cost/time recalculations after the initial production run.
***BEFORE PURCHASING: Please read the entire listing to understand the requirements of the build***
The Proton Pack is a custom designed, 3D printed hopper feed that allows for 20+ rounds per second. This is offered as a do-it-yourself kit, or a fully assembled an pre-soldered unit.
The kit version requires soldering and assembly. Both versions will require a 3S Jupiter (containing 3S Kraken motors), or other Rival blaster such as the Perses, Zeus, Hera, Khaos (adapters sold separately). Standard Nerf Rival blasters will need to be rewired for a 3s battery to be compatible with the Proton Pack.
FEATURES: • High reliability, jam-free design. Thoroughly tested. • Compatible with absolutely any Rival ammo including 3rd party ammo, and cheap knock-off rounds. • High power custom designed brushless blower with 40 mm/H2o of static pressure. Enough to feed your blaster 4+ feet vertically • 3s Jupiter compatible (2s Jupiter Blasters can be converted to Kraken motors to be compatible) • Simple circuit, easy to install! Simply plug the pack's XT-60 cable into your blasters battery XT-60 plug. A standard re-wire for 3s is all that's required.
SPECS: • 20+ rounds/sec continuous ball feed • 30+ rounds/sec 'burst' feed rate for first 50-60 shots (Note, fire rate is ultimately determined and limited by your blaster). • Printed in PLA filament • Battery tray dimensions: 137 x 49 x 25 (LxWxH) • Dimensions of hopper unit without container: 8" X 4.75" x 4.5" (LxWxH) • Dimensions of hopper unit with 1-gallon container: 14.5" x 4.75 x 5.5" • Dimensions of 1-gallon container: 5.5" round, 10.5" height • Dimension of hopper ring (size you would cut a container hole to attach to a flat plate): 4.75"
BOTH KIT AND FULLY ASSEMBLED OPTIONS INCLUDES: • 10x 3D printed parts: Hopper Body, Base Plate, Top Lid, Snorkel, Impeller, Custom Blower, Mounting ring, and Swiveling hose connector • Custom PCB control board (features current detection and simplifies wiring!) • 2205 Brushless blower motor • 30A Brushless ESC • 1 High quality, high torque 37D-sized all metal gear motor • 20+ M3 stainless machine screws, square nuts. • Pre-installed Brass inserts • XT-60EM Mountable battery connector • 5' of red and black 14AWG wire • 4' of 1" hose • 7 hose clips • 2.5mm Allen key (batch #1 didn't include this)
TO COMPLETE THIS MOD YOU WILL NEED: • Rival compatible blaster re-wired with an XT-60 connector • Hose adapter to your blaster (sold separately or optionally on this page) • 3s Lipo Battery. We HIGHLY recommend the high quality 2700mAh pack that is listed ONLY on this listing. We will make other options available as we get them in. The Turnigy 1500mAh 35-70c pack is also compatible. • Soldering iron, solder and basic tools (for DIY-KIT version) • A relatively airtight container, bucket, etc. You can purchase the 1-gallon container on this listing.
COMMON QUESTIONS: DUEL WIELDING: In order to duel wield the proton pack, you'll need two independent packs and blasters. While I did test a single unit that could feed two systems, the fire rate was cut approximately in half, so I thought it best to use two units, rather than reduce the fire rate by 50%. We do not recommend modifying the hopper to attempt a duel-wield out of a single pack, as the airflow on the fan will not be high enough to feed two reliablely.