OFD Meowser/Anoid Meowser Hardware Kit
OFD Meowser/Anoid Meowser Hardware Kit
LEAD TIME: 1 BUSINESS DAY
The OFD Meowser is a flywheeler pistol designed by Old Fusion Designs using his Flycore system. Available in full-auto (N20 gear motor) and semi-auto (OOD Neutron Solenoid), this 3D-printed blaster is a fun, versatile flywheel blaster to build and play with.
This Hardware kit contains all of the required and optional hardware you need to build a Meowser blaster from your own 3D-printed parts. Links to Flycore and Meowser 3D files are linked below.
FEATURES:
• All hardware recommended by the designer
• Includes optional hardware
• Flywheel/ motor choice based on what's best for setup
• Just add a LiPo, alarm, and charger and you're good to go!
INCLUDES:
• 2x - Motors (Kraken/Fang ReVamp/Loki)
• 1x - N20 Gear Motor (300-2000 RPM) or Neutron Solenoid with Diode
• 1x - Flywheel Pair (Kepler/Daybreak/Pulsar/Worker Micro/FTW micro)
• 9x - M2x5mm Cage Screw
• 14x - Brass Heat Set Insert
• 23x - M3x8mm Cup Head Screw
• 8x - M3x12mm Cup Head Screw
• 9x - M2.6x12mm Toy Screw
• 1x - M2.6x10mm Toy Screw
• 1x - M3x8mm Button Head Screw
• 1x - M3 Thumbscrew
• 1x - 10A Cherry Lever Switch
• 1x - 10A Cherry Button Switch
• 1x - 21A Tezuo Button Switch
• 2x - Springs (Mag Release/Trigger)
• 18 AWG Silicone Hobby wire
• 22 AWG Silicone Hobby wire
• 1x - XT-30 M/F Pair
• Pre-cut Heat Shrink
Note: No 3D-printed parts are included with this kit
LINKS:
• Compatible Standard Talon Magazines
• LiPo Alarm
• Charger
• Voltage Meter
• Holdster Magnets
Share
Great kit. Assembling my meowser now.
Great kit, went together easily. Only issue was that i didnt have the thumbscrew included.
I purchased the Meowser hardware kit containing the Kraken motors and the worker hurricane flywheels. OOD did send the wrong flywheels by accident (FTW), but customer service was very good and immediately sent out the correct flywheels. All other packaged components were the correct count. There was ample length of 18 AWG and 22 AWG wire left and extra M3 X8mm Cap Head Screws when finishing the build. I did put a square tipped barrel option on my Meowser which requires 1 more M2.6X 12 mm toy **** than was provided (A total of 10X was needed), so it would be nice to have a few extra of those screws just in case.