Gyrosoft Nemesis Mod Kit
Gyrosoft Nemesis Mod Kit
The Gyrosoft Nemesis Mod Kit is the ultimate upgrade for the Nerf Rival Nemesis MXVII-10 K. Featuring Gyrosoft's flywheel cage, OOD Photon flywheels, Kraken motors, and a 3D-printed upgraded cage for the Nerf Rival Nemesis blaster. Featuring OOD photon geometry and a crush identical to the Juno, this part provides a substantial performance upgrade over the stock wheels and cage. Additionally, with 130-motor compatibility, this is the easiest way to give a broken or burnt-out Nemesis new life.
FEATURES:
• Gyrosoft Nemesis Mod Kit
• Photon-compatible rival flywheel cage included
• Easy mounting of your trigger switches with our custom switch plates
• Easier performance upgrade than sourcing 380 motors!
• Cage designed by Gyrosoft
• Compatible with the Nerf Rival Nemesis blaster
INCLUDES:
• 1 Gyrosoft Nemesis Flywheel cage in OOD Orange
• 2 Photon Flywheels
• 2 M3 x 14mm Socket Head Screws
• 2 M3 Hex Nuts
• 2 Kraken Motors
• 2 Tezuo 21A Lever Microswitches
• 1 3D Rev Switch Plate
• 1 3D Fire Switch Plate
• 1 Nemesis Thumbscrew
• 1 16AWG Hobby Wire Red/Black
• 1 18AWG Hobby Wire Blue
• 1 XT-60 Connector
• 2 Large Heat Shrink
• 1 Small Heat Shrink
PERFORMANCE:
Average FPS (Standard Deviation)
• 122 (6) FPS with Kraken motors on 3S
SPECS:
• Material: Multiple
• Dimensions: Add product dimensions, spring dimensions, etc here
• Weight: Actual weight of the final product (not boxed product, do that below) always use (g) grams for both
• Recommended Age: 14+
• SKU: 3D GYR NEMESIS CAGE + NEMESIS ULTIMATE HWK (NEW)
LINKS:
• Nemesis Mod Guide
• Turnigy 3s 2200 mAh LiPo
• LiPo Starter Pack
• More Nemesis Mods + Accessories
Share
Great product worked excellently only bad thing was im not good enough at wiring or soldering
Owner is sharp and communicative. He wants his customers to have fun, and it shows.
Only issue I had with this kit is that I had to trim a small amount off of the 3D-printed spin-up trigger extension end, as there was slightly too much preload on the spin-up switch that caused occasional sticking. Once I figured that out, I was good to go.
I would order from Luke again without concern -- he is terrific.
Nemesis Mod Kit
It was still very easy to install despite my garbage soldering skills. Everything works beautifully and my Nemesis is now a tank ready to destroy!
Very easy to install. Thank you. Turns the Nemesis into a beast.