Worker Standard Crush Flywheels (pair)
Worker Standard Crush Flywheels (pair)
The Worker Standard Crush Flywheels offer a durable upgrade that can increase your velocity and range. Compatible with multiple blasters including Stryfe, Rapidstrike and Rapid Red to name a few. A slightly smaller and lighter version of the High Crush Flywheels.
FEATURES:
• Lightweight & Durable
• Increased Speed & Range
• Compatible with multiple blasters
• Compatible with most stock cages (Stryfe, Rapidstrike, etc)
SIZING:
• Root Diameter: 33.9mm
• Outside Diameter: 35mm
• Inside Diameter: 30.7mm
• Height: 14.97mm (without top nub)
• Height 18.97mm (with top nub)
SPECS:
• Material: ABS Plastic
• Weight: 34g
• Dimensions: 10 x 6 x 3 cm
• SKU W0048
Share
nice tight fit, but I found out the hard way that they are almost guaranteed to break if you try to remove them, even with a 2 pronged push tool from behind, one of the flywheels cracked then broke during removal from the motor shaft. The second has stress marks on it around the motor Point. Ended up ordering a second pair.
The second pair I ordered worked terrific, so as long as you do not ever need remove them they seem to work great with a soft tipped dart. They'll melt hard tipped darts really quick however!
These are a TIGHT fit for a reason, use a small press to put them on, no drilling required.
This is great advice. We don't recommend hard-tipped darts with any of our flywheel cages or flywheels. The high-crush setups are all prone to this type of failure. Hard tips should be avoided at all times in upgraded flywheel systems.
Modification required for smooth 2mm shaft motors
Thanks for your feedback. These do not require modification for a standard 2mm shaft. They are a very tight fit like most of our flywheels, but this is intentional to ensure a strong hold when installed. Modification is not recommended as you're likely to reduce the balance if changing the hole size in any way.
These are great for the money, though they do require slight modification to use with 2mm motor shafts.
They work great but I spent a hour trying to get them in my strife very hard to install but work well.
Used the flywheels to modify my Barricade RV-10 to shoot nerf elite and adventure force chili darts and it worked out great.