Skip to product information
1 of 2

Quik Hardware Kit

Quik Hardware Kit

Regular price $63.00 USD
Regular price $63.00 USD Sale price $63.00 USD
Sale Sold out


This kit contains all of the hardware requred to build a Quik blaster, including optional basic optional hardware.  The Quick is Full Auto mag through grip pistol using the Flycore system, blaster designed by Old Fusion Designs.  Link to Flycore Angled and Quick below, Quik files are sold seperately by OFD on their etsy page.  Combinations of motor and flywheel that are not compatible will not be available choices.

*No 3d parts are included with this kit

• All hardware recommended by the designer
• flywheel and motor selection based off what you want for your blaster
• Just add a LiPo, alarm and charger and you're good to go!

• 2x - Motors (Kraken/Fang ReVamp/Loki)
• 1x - N20 Gear Motor (300-2000)
• 1x - Flywheel Pair (Kepler/Daybreak/Pulsar/Worker Micro/FTW micro)
• 6x - M2x5mm Cage Screw
10x - Brass Heat Set Insert
10x - M3x8mm Cup Head Screw
4x - M3x12mm Cup Head Screw
7x - M2.6x12mm Toy Screw
• 1x - M2.6x10mm Toy Screw
• 1x - M3 Thumbscrew
2x - 10A Cherry Lever Switch
1x - 21A Tezuo Button Switch
• 2x - Mag Release/Trigger Spring
• 18 AWG Silicone Hobby wire
• 22 AWG Silicone Hobby wire
1x - XT-30 M/F Pair
Pre cut Heat Shrink

• LiPo Alarm
• Charger 
Voltage Meter
Holdster Magnets
Angled Magazines

Quick Files
Flycore Angled Files

View full details

Customer Reviews

Based on 3 reviews
Ludwig D.
Awesome kit

I ended up using this kit for a 41mm daybreak Stryfe setup. Absolutely launches darts but unfortunately one motor stopped spinning after about 2 hours of play. Not sure why, it wasn't seized and flywheels rotated freely.

Trae L.
What you want

The kit give you everything you want to make your Quik operational but could use about 6” of more wire but (proper wire management) it will get the job done.

James S.
The convenience is worth it

A bit pricy but I went for it due to the convenience and don’t regret it- everything is of high quality. I do feel like they were a bit stingy on the wire lengths, especially if you mess up. Additionally if you put in all of the optional threaded inserts in in the Flycore directions you end up one short for the Quick assembly…