Skip to product information
1 of 4

Versatile Single Stage MOSFET Board

Versatile Single Stage MOSFET Board

Regular price $2.17 USD
Regular price $4.99 USD Sale price $2.17 USD
Sale Sold out
Shipping calculated at checkout.

The Versatile Single Stage MOSFET board offers a switch platform for your Nerfing needs!  This board is a bit larger than our mini MOSFET board but is our only MOSFET that can be used with a PWM signal reliably and is compatible with any pair of standard flywheel motors we offer.

The TRIG/PWM signal should lead to your switch and then to your battery positive. This will switch the MOSFET on by sending a positive current to the gate on the MOSFET (see wiring photo on the last image) 

*This Product is compatible with a PWM signal from an Arduino or similar microcontroller.

*A note about motor and MOSFET ratings: Our community often overestimates motor current ratings, as many of these are done on paper. The stall current is extremely brief. Because of this, we have rated each of these MOSFET products by the number of motors they can support. We warranty them for this use rather than giving specific ratings.

FEATURES:
• For use in all build types

INCLUDES:
• 1 Versatile single-stage MOSFET board

SPECS:
• Rated for any pair (2) of 130- or 180-sized motors we sell.
• Dimensions: 17W x 34L x 14MM

LINKS:
• More Boards + Electronics
• Motors

View full details
  • 5 stars: 6 (67%)
  • 4 stars: 0 (0%)
  • 3 stars: 0 (0%)
  • 2 stars: 0 (0%)
  • 1 star: 3 (33%)
B
Bay a.N.D.B.
White led flashing

I used this mosfet in my dual stage select-fire protean build. I have yet to get the thing to work properly but I’m thinking the problem now is this mosfet can only handle one set of flywheels and maybe using a 4s and dual stage motor setup was too much for this to handle and so I’m assuming the white led is letting me know it’s either fried or can’t handle the load. I’m so beginner when it comes to this level of wiring. I was thinking maybe I need two of these one for each set of flywheels? Although this was connected to the solenoid so maybe I’m completely off. Help.. it’s the select fire protean on printables. Version 4. I have the old mosfet board not the tiny one but the bigger one and I may have to dig that up and try it out..

E
E.
Who are you even meant to use these

My mom bought me the demolisher mod kit, they said that they didnt have the board, and that these would work instead. THEY DONT, and even if they do, there is no clear way on how to even solder stuff onto the board. And there is no videos online on how to solder flywheels onto the board either. I was very excited to mod my modulus ECS-10, but im highly disappointed and extremely mad with these boards

We're sorry you've had a poor experience with the spring. Upgrade springs will certainly have heavier priming weight. This is unavoidable when upgrading a heavier spring.

T
TY
Great board, just remember to wire correctly!

The board has worked flawlessly once OOD reminded me that the power connects to one side of the trigger switch... (Dumb mistake on my side).
I have to thank Luke for taking the time to go over the wiring and figure out my error when I couldn't get it to work initially.
Incredible customer service and a great board!

B
B.M.
Small and powerful

This thing is great, barely any soldering to get it up and running, thanks to its **** terminals. And despite the height of them, this thing fits anywhere! (it fit perfectly down in the grip of my Stampede)
It packs a punch too, handles being the kill switch for my 7Kg+stock springed Stampede just fine.

J
Justin D.

Versatile Single Stage MOSFET Board

Thanks for placing an order with us! I noticed that you left a one star review on Versatile Single Stage MOSFET Board Would you mind giving us a bit more information about the issue you were having with the product? We would be happy to offer advice or a replacement on the item you were having an issue with in the event that you received a defective product.

Looking forward to hearing from you!

J
Joel C.

Simple to connect and use, works well. Was confused when motors spun up without the trigger signal. Found out I had reversed the battery connections (forgot i had a reverse colored pigtail). Board still worked fine after that.

G
Greg C.
Reviewed wrong mosfet

Ignore my othervreview. I thought I was reviewing the value mosfet. I have yet to install this particular item.

K
Kyle C.
Revisited the product, worked perfectly fine second try.

After an unsatisfactory experience with this product previously, I still needed a mosfet and figured I'd purchase a second after a talk with the support team. This time, my mosfet worked completely fine and is currently installed in my 3s hera. Hope that that no one else has any issues going forward.

K
Kyle C.
This mosfet did not work at all. 0/5

I've used OoD's high power mosfet before and would happily give it a 5/5 review because of how easy it was to use and how well it held up. With that product out of stock, I decided to purchase the versatile single stage mosfet, hoping that I could use it as a replacement, even emailing the support team to check that it would, indeed work for my build. (Their answer was a yes) This mosfet was DoA and was completely unusable. My father, an electrician who earned a degree in avionics, was able to test this product and tried to make it work. No matter what we did, checking every component, nothing was able to work. After a long evening of trying, and failing, to fix the issues, I'm writing this review because we are dissatisfied with the versatile single stage mosfet board. It's not even worth returning the product, because shipping the order back would be more expensive.
I appreciate OoD's shop and haven't had too many issues before, but this was disappointing.