OOD K25 2.03 x 280mm Spring with Squared Ends
OOD K25 2.03 x 280mm Spring with Squared Ends
The K25 spring is another legacy modding spring used in many blasters. These are virtually identical to the original K25 from McMaster, except that I had these custom-ordered, and they have flat/squared-off ends for a better installation experience and more reliable performance. Even if you need to cut the spring, one end is flat, making installation easier!
FEATURES:
• K25 spring
• Another great legacy spring
• Compatible with many blasters
• Squared/flat ends for easier installation and use
INCLUDES:
• 1 K25 Spring
PERFORMANCE:
Average FPS
• 175 FPS in a Caliburn C4 with a 0.527 x 14in barrel
SPECS
• Material: USA-made spring-tempered steel
• Type: Compression Spring
• Dimensions:
Spring Gauge: 2.03mm (0.08in)
Length: 280mm (11in)
Outer Diameter: 24.6mm (0.969in)
Coils: 26
• Squared: Both Ends
LINKS:
• More Legacy Springs
• All Springs
Share

Insane power upgrade for any blaster that can take 280mm springs like this. I tried this spring combined with a Worker 1.8x270 spring in my Kunlun and with the stock barrel, it was averaging around 295 FPS with Sabre 1.3g t-darts. Dart Zone 1g bamboos were hitting around 335-345 FPS with the same setup. However, I'd strongly recommend upgrading your plunger rod and catch plate to the hardened steel version from Worker because of how hard this spring shoots.
Bought this for my Caliburn C4. Wanted to dial it in a bit more with the Shearforce BCAR I’m using. It definitely helped!
I've been buying about 300 of these a year and they're the best spring for high FPS half dart hobby blasters.
Can we get another bulk tier at 100 springs ordered?
Delivered just as described with above average packaging in a timely manner
Affordable, better deal then pre cut, I had enough for a Kronos and a Fury X from one spring.
(For anyone wondering the Kronos hits 120+ with just the spring, and the Fury X hits 250 with the spring and a 12 inch barrel.)
- 5 stars: 35 (100%)
- 4 stars: 0 (0%)
- 3 stars: 0 (0%)
- 2 stars: 0 (0%)
- 1 star: 0 (0%)
Insane power upgrade for any blaster that can take 280mm springs like this. I tried this spring combined with a Worker 1.8x270 spring in my Kunlun and with the stock barrel, it was averaging around 295 FPS with Sabre 1.3g t-darts. Dart Zone 1g bamboos were hitting around 335-345 FPS with the same setup. However, I'd strongly recommend upgrading your plunger rod and catch plate to the hardened steel version from Worker because of how hard this spring shoots.
Bought this for my Caliburn C4. Wanted to dial it in a bit more with the Shearforce BCAR I’m using. It definitely helped!
I've been buying about 300 of these a year and they're the best spring for high FPS half dart hobby blasters.
Can we get another bulk tier at 100 springs ordered?
Delivered just as described with above average packaging in a timely manner
Affordable, better deal then pre cut, I had enough for a Kronos and a Fury X from one spring.
(For anyone wondering the Kronos hits 120+ with just the spring, and the Fury X hits 250 with the spring and a 12 inch barrel.)
Fast delivering excellent service! Item came as described!
This thing is very powerful.... Hold on to your socks
Swell
Bro this thing is monstrous so much power
Recently I bought 2 K25 springs with squared ends for a project I’m working on. No issues at all. Thanks OOD!
Fit my longshot pro pretty well, and increased performance significantly with upgraded plunger!
Very nice packaging and very good products
Hard to cut, had to use an angle grinder and a marker to cut to size but a Dremel might work too. That’s what happens when you buy high quality springs.
The springs arrived early which was a nice surprise. Quality is always great with OOD products. Service is also alaways excellent and prompt. Can't ask for more than that. Thanks for a great service and variety of products
I use these as mainsprings for my Booster pistols. Squared ends make it a lot better.
Great upgrade for my old kronos.
Better Than Stock, For Sure 100% . Been A Loyal Customer , Staying For The Long Haul.
I'll be using this spring (cut down) in my Long Shot Upgrade, I also picked up a 3d printed scar for this build. I'll update review after everything is finished! The Quality of the spring is awesome and the Out of Darts team is great to work with.
K25 Spring with squared ends (BETTER than McMaster)
Perfect spring for my Xshot Longshot!
Great spring.
Good quality spring, much better than the one I replaced in my workerburn
Spring go boiiiiing
Better than mcmaster. Friendlier than k26
It’s exactly as it says it’s a k25 spring but with squared ends. It’s even cheeper than mc master with cheeper shipping too.
This worked better than I expected. I put the whole coil in my Lynx.
Make sure you have a bolt cutter. I only had pliers/side cutters, and it took all my hand strength to cut it to size.
Exactly what I needed, can't speak to McMaster's but the finished end makes for ease of use cause I only have to fix the cut end.
You don’t get much more ubiquitous than the K25, and Out Of Darts’s squared ends version is even better! I cut these in half to make talonclaw size springs, and they work great!
It fits well and provides good power.
EXCELLENT
What can I say? they are springs, and they did their job. Packaging was good and came in a timely manner from PNW to central california