The OOD Infinite Pack is an original custom-designed hopper for rival and rival-compatible blasters. Featuring a brushless blower-pressurized system and a gear motor-driven agitator, this feeding system can reliably deliver an impressive 20 rounds per second from the pack to a blaster through up to four feet of hose. Additionally, the current-sensing printed circuit board makes setup intuitive and straightforward: Just plug the pack into your blaster's battery terminal! The pack's LiPo will power both the feeding system and the blaster.
This 3D Parts + Hardware Kit includes everything you need to solder and assemble the most current v4.0 of the Infinite Pack yourself, or choose Fully Assembled and we'll build it for you. Adapters for a variety of blasters are sold separately.
Battery NOT included. Ammo NOT included, it is available as an optional add-on.
FEATURES:
• OOD Infinite Pack Rival Hopper
• High-capacity, pressurized feeding system for rival blasters
• Thoroughly tested, reliable, jam-free design
• Delivers 20+ RPS through 4ft of hose!
• Plug-and-play, current-sensing smart board
• Updated, v2.0 Arduino-based PCB!
• Toolless battery door
• Compatible with Juno and most 3S-modded Rival blasters
• Compatible with most Rival-spec ammo, including Worker Cheetah Rounds*
*Do not use new Headshot ammo with this product! The rounds are too stiff and can damage your connected blaster.
INCLUDES:
Everything you need to solder and assemble this pack yourself, including:
• 1 Set of 3D-printed parts (Nebula + Galactic Black + Orange, or your custom colors)
• 1 1-gallon container with twist-lock ring (pre-installed)
• 1 v2.0 Printed Circuit Board
• 1 37D high-torque metal gear motor
• 1 2205 Brushless blower motor
• 1 30A Brushless ESC
• 1 20A Boat rocker on/off switch
• 12 M3x6.7mm Heat-Set Inserts (pre-installed)
• 3 14AWG wire with XT60 terminals (pre-wired)
• 10 hose clips
• 1 2.5mm hex key
• Hardware
PERFORMANCE:
Average Rate of Fire*
• 20 RPS continuous
• 30+ RPS burst (first 50-60 shots)
*Note: The rate of fire is ultimately determined and limited by your blaster.
SPECS:
• Material: 3D-Printed PLA Plastic
• Dimensions:
• Infinite Pack without container: 8x4.75x4.5in
• Infinite Pack with default 430-round container: 14.5x4.75x5.5in
• 1-gallon container: 5.5in OD, 10.5in height
• Custom container hopper ring (sold separately): 4.75in*
• Weight: 1250g
• Recommended Age: 14+
*This is the size you would cut a container hole to attach to a flat plate
LINKS:
• Juno blaster (3S required)
• Blaster Adapters
• Worker Cheetah Rival Rounds
• Battery (Largest)
• Custom Container Adapter Ring
• More Infinite Pack Mods + Accessories
