I love these things for simple budget builds with great power . They aren’t perfectly balanced but balanced well . They are my “go to” flywheel for budget builds with good accuracy
Work amazing! Paired with some 3s krakens and a 42.5mm crush cage they get darts flying pretty fast! I especially like how the wheels are toothed to the darts last longer.
Cheap and work well
Fast shipment and good packaging
Go-to wheels for wide-head darts
Worker Smooth Flywheel (Pair)
A+++++
The wheels work great and come at a more affordable price. Excellent option for HvZ blasters.
I purchased these as a replacement of the Daybreak flywheels included in the Stryfe mod kit. I found that the sharp inner corners of the Daybreak wheels badly tore up my darts after as little as one time through. These are much less rough on the darts even though they are a higher crush. It will however, add ~20 fps as compared to the Daybreaks at the same cage spacing. So keep that in mind if your club has an fps limit for events.
A+ everything
Using them in a 3s modded rapidstrike, 42.5mm cage, rhino motors & pusher. Works great for accuracy and fps.
My go to budget flywheels. Pairs great with the Miechel and Valkyrie motors.
Awesome for 3s builds
For anyone wondering, these do not fit in stock nerf elite flywheel cages, as they are a bit too big. In the worker 42.5mm cages, however, they're decently concave and great for a budget, low crush setup, in addition to being very lightweight.
One of a kind shop for all your Nerf hobby needs. I got the parts on time to do my custom blaster video review. Thanks for the great service!
Good flywheels all around, I don't have a chronograph but paired with krakens and a 42.5 cage they hit pretty hard. Considering the price, they actually have a pretty decent concave. They are a bit heavier than worker transparent canted flywheels (the wheels I previously used), but other than that they are fantastic.
The best flywheels I've ever bought great balance, fit perfect, sound is quite love them alot
Pretty solid flywheels, they dont tear darts up as much as serrated ones do, and they fit in a variety of cages. Im a fan
These wheels are good quality, and they fit in a 42.5mm worker cage just fine! I'm excited to use these on the battle field! Thanks, Luke!
I used these in my 41.5 mm stryfe with kraken motors, and it shoots laser beams, and is pinpoint accurate around 50 ft. I managed to tag someone’s feet that was sticking out about 2 inches from a box while they were taking cover about 40 feet
away, with only 3 shots. Will be using these in my future spectrum build as well.
Worker Smooth Flywheel (Pair)
Work great
These are easily the most consistent wheels I’ve ever used. The FPS variation is extremely low in my experience, and in both a high and low crush system the injection is smooth and they launch well. Mileage may vary but I can’t recommend these enough for a simple and reliable build.
I installed these in a 42.5mm cage in a gryphon pistol running fang ReVamps on 2S. It shoots DZ Max darts somewhere between 110 and 120 very handily and quite accurately.
Very good for low power builds (anything under 150) like hvz or cqb.
Worker Smooth Flywheel (Pair)
Works fantastic in my matrixfire masterkey
These are a great pair of flywheels. I rewired my Stryfe with the Meishel 2.0 130 2s motors, and with these flywheels, it hits hard! It is worth noting that I had to grind significant portions of the original flywheel cage out for them to fit, as well as popping the front of the blaster slightly. Other than that, these are wonderful flywheels!
Not sure of the specific issues with the wheels other reviewers have left, but these wheels are awesome. U will need a shell that has good clearance and no shell rubbing. 1 reviewer said the wheel melted. Sounds like a motor overhearing issue. Regardless, most of the issues sound like the wheels were rubbing on something. These wheels can produce daybreak type performance at a little over half the cost. I prefer daybreaks, but sometimes I also prefer $9 flywheels that spank! Pair these with FRV or krakens or something with some torque.
Did not fit on my Mieshel 2.0's, I could of gotten faulty ones, but I would say you should probably get higher quality ones. It may also just be my motors. Overall, I had a bad experience, and would not recommend, but you could try it if you need a cheap wheel.
I tried these with a 42.5 mm cage. DO NOT USE WITH 42.5 CAGE. USE 43 mm CAGE. These are too big to have darts go through. I recommend the 43 mm.
Recently install these wheels on a turbine modification with M TB neo rhino motors And stock cage. After 600 darts The blaster started making a screeching noise disassembled to see what was going on and found that these wheels had completely melted on to the motor shafts. Due to this not sure what to think of these wheels. I have 2 more pairs of these wheels one brand new and 1 on the clear 435 worker cage with M TB neo hellcat 180 Motors. I have that mounted onto a soon to be nerf battle tank remote controlled. Initial testing with that cage and motor combination with those wheels has only Put 30 darts through it. So now I am considering getting different wheels for it as I do not believe it will stand up to those motors
Is this compatible with the stryfe?
Yes, this is compatible with the stryfe, however you'll need an upgraded cage, such as the polycarbonate injection molded worker cage.