1 6

Dart Zone Pro MK-3 3S Mod Kit

Dart Zone Pro MK-3 3S Mod Kit

$46.00 USD
$46.00 USD
Sale Sold out


The Dart Zone Pro MK3 is a very solid blaster. We couldn't help ourselves, however, in upgrading it. This kit features two Kraken motors for the flywheels, a custom cage designed by Luke for the MK3, and a pair of Daybreak flywheels. This kit includes the components needed to create a modular cage system with an XT-60 connector. Add the other half to your stock cage and you can swap your cages easily!  Check out our blog post with details on this mod.

*LiPo BATTERIES CAN BE DANGEROUS!

OUT OF DARTS DOES NOT TAKE ANY RESPONSIBILITY FOR BATTERY HANDLING OR MISUSE. READ THIS ENTIRE PAGE ON LiPo SAFETY BEFORE PURCHASING 

Battery, charger and LiPo alarm are optional add-ons.  LiPo Battery add-on can only be shipped by ground to the continental USA.  All packages containing LiPo Batteries have longer delivery times. For more information visit our FAQ page.

FEATURES:
• Designed by Luke
• Increased spin-up time
• Variable FPS ratings depending on cage selection
• Simple upgrade just re-solder motors and install new cage

FPS AVERAGES / STANDARD DEVIATION / DART TYPE 
• 39mm - 162 / 5 / AF Pro Short
• 39mm - 180 / 6 / AF Pro Full Length
• 40mm - 155 / 3.8 / AF Pro Short
• 40mm - 177 / 4.7 / AF Pro Full Length
• 41mm - 143 / 2 / AF Pro Short
• 41mm - 182 / 3 / AF Pro Full Length
• 42mm - 111 / 4.9 / AF Pro Short
• 42mm - 155 / 8.1 / AF Pro Full Length

INCLUDES:
• 1x - OOD MK3 Pro Cage (41mm spacing recommended)
• 2x - Kraken 130 Motors
• 1x - Daybreak flywheels (pair
• 4x - motor screws
• 1x - Motor Span Board for easy soldering
• 1x - XT-60U mountable connector for easy cage swapping
• 1x - XT-60 Male/Female for modular cage swap
• 1x - Small Heat Shrink Wrap cut to 6"
• 1x - Large Heat Shrink Wrap cut to 1"
• 2x - 3D Printed Motor Cage Spacers

• No wire required! Blaster comes with 16AWG! 

OPTIONAL ADD-ONS:
• 3s 850 mAh Tattu LiPo + LiPo Bag + LiPo Alarm
• Charger

SPECS:
• Material: 3D Printed PLA plastic (cage)

ADDITIONAL LINKS:
• Dart Zone Mk3 Mod Parts







View full details

Customer Reviews

Based on 21 reviews
95%
(20)
5%
(1)
0%
(0)
0%
(0)
0%
(0)
J
Jack S.

Dart Zone Pro MK-3 3S Mod Kit

B
Bryan

A+++++

J
Joe P.
HOLY CR@P BATMAN

Wow. Picked up the MK3 on clearance and this kit including the Kraken pusher motor. All the kids in the neighborhood hear that spooling sound and run back to mommy. Granted I'm 30 years their elder, but hey I have a job. Buy this, minimal soldering and the YouTube video walks you through everything. Love it. Get the short dart adapter fix as well, it will work without it but you will trash a lot of darts in the process.

A
Andrew D.
Great mod kit!

Great kit! The board included makes wiring the motors so much easier. The XT60 connectors included are not a complete pair (I forget which is missing; M/F) so I recommend purchasing another connector or removing the one from the battery tray to complete the removable flywheel cage.

D
Dan B.
Great kit overall

This kit has just about everything you need to upgrade your MK3. Luke's build video is again a great resource if you aren't an experienced modder. The only thing I thing it may need is a third Kraken motor for the pusher. I'm not sure if it was just my blaster or if it's all MK3's but on 3S lipo I got pusher runaway with both the stock and the Valkyrie motor I tried. Popped in the Kraken and the problem went away. The picture is the current state of the build so the cage isn't one included in the kit and there are a few other quality of life bits from Out of Darts included as well. I do have the included cage and one of lower crush wired up with a XT-60 connector on the spanner board for quick swaps.

User picture
123